污污的污污的污污的污网站污

锐钜科技有限公司 Shenzhen Ruiye Technology Co., Ltd.
current position:
news

News

Inverter working mode and operation keys
| 作者: lytrannet | 发布时间: 2019-06-02 | 630 次浏览 Source: | Author: lytrannet | Published: 2019-06-02 | 630 views 分享到: | Share to:
The configuration of the operation keys and the names of the keys of various inverters vary greatly.


(1) Mode switch key: used to change the working mode. The more common symbols are: MOD (Mode), PRG (Program), etc.


(2) Increase / decrease key: used to increase or decrease data. Common symbols are △ or ▽, △ or ▽. Some inverters are also equipped with a horizontal shift key (or) to speed up digital changes.
What operation keys are equipped with the inverter?


The configuration of the operation keys and the names of the keys of various inverters are very different. To sum up, there are the following categories:


(1) Mode switch key: used to change the working mode. The more common symbols are: MOD (Mode), PRG (Program), etc.


(2) Increase / decrease key: used to increase or decrease data. Common symbols are △ or ▽, △ or ▽. Some inverters are also equipped with a horizontal shift key (or) to speed up digital changes.


(3) Read and write keys: used for "read" and "write" data codes in the programming setting mode. There are two functions of reading and writing. Some use the same key to complete, and some use different keys to complete. Common titles are: READ, WRITE, SET, DATA, etc.


(4) Work operation key: In the key work mode, it is used to perform operations such as "run" and "stop". The first are: RUN (working), FWD (forward), REV (reverse), STOP (intermittent), JOG (jog), etc.


(5) Reset key: used to restore the inverter to normal condition after a fault trip. The title of the key is: RESET.


(6) Numeric keys: Some inverters are equipped with numeric keys such as "0-9" and decimal point "·". When setting the data code, you can directly enter the required data.




How does the inverter work?


There are two main types:


(1) Key operation mode: It is used to control the work and interruption of the motor through key operation.


(2) Working mode of external control: That is to complete the operation of the motor through external control signals such as: potentiometer: 0 ~ ± 10V voltage signal, 4 ~ 20mA current signal.


Which method is used is preset in the programming guard.
如何为电机选择合适的变频器 Previous: How to choose the right inverter for your motor
Name: Shenzhen Ruiye Technology Co., Ltd.
Phone: 0755-27444753
Email: sales@crackseo.cn
Address: No. 202-209, 2nd Floor, Block H, Huafeng SOHO Creative World, Taoyuan Community, Xixiang Street, Baoan District, Shenzhen